中国喷墨论坛-喷墨技术应用-数码影像-数码印刷-数码印花

标题: 论坛人气怎么这么低落。发点大家感兴趣的79/99维修手册 [打印本页]

作者: chuchuhp    时间: 2014-9-10 15:02
标题: 论坛人气怎么这么低落。发点大家感兴趣的79/99维修手册
本帖最后由 chuchuhp 于 2014-9-10 15:05 编辑

论坛人气怎么这么低落。发点大家感兴趣的79/99维修手爱普生7910 / 9910/9908/7908/7710/9710报错大全
维护请求错误

维护REQ - 0002 - CR扫描通柜台附近指定的生活。

维护REQ - 0008 - RTC备用电池变得精疲力竭

维护REQ - 0010 - 与援助委员会的通信是不成立的。

维护REQ - 0040 - 泵计数器附近指定的生活。

维护REQ - 0080 - 日期尚未确定

维护REQ - 0800 - 墨盒浪费生命的尽头附近的墨垫

维护REQ - 1000 * 1 - 水墨生命的尽头附近的选择

维护REQ - 4000 - 检测两次在一排,所有的喷嘴堵塞。

维护REQ - 0088 - RTC备用电池变得疲惫和日期尚未确定。

服务请求错误

服务REQ - 1101 - CR生活错误

服务REQ - 1125 - CR HP检测错误

REQ - 1138 - 过电流错误

服务REQ的 - 113F - 锁定的错误

服务REQ的 - 122F - 锁定的错误

服务REQ的 - 131B - 头驱动程序(传输门)过热错误

服务REQ的 - 13F0 - ICL的操作错误

服务REQ - 1411 - 选择错误

服务REQ - 1412 - 泵的使用寿命错误

服务REQ - 1428 - 水墨持有人董事会总成

服务REQ - 1430 - 持有人墨垫错误

服务REQ - 1431 - 水墨选择生活的错误

服务REQ的 - 1434 - IC盖解锁错误

服务REQ - 1494 - 水墨选择错误

REQ - 1496 - 选择墨水传感器错误检测

服务REQ - 1497 - 切换超时错误

服务REQ的 - 152F - 锁定的错误

REQ - 1530 - 驱动辊HP检测错误

REQ - 1536 - 加压复位错误

服务REQ - 1537 - 加压错误

服务REQ的 - 1551 - 纸张厚度确定错误

服务REQ - 1561 - 纸张厚度在电源上的错误

注:SpectroProofer相关的错误不会发生在爱普生Stylus Pro 7700/7710/7700M/7710M/9700/9710,因为它不支持的SpectroProofer。

自动收了卷轴相关的错误不会发生爱普生Stylus Pro 7700/7710/7700M/7710M/7900/7910/WT7900/WT7910 / / 7890/7908,因为它不支持自动收纸。

有关的的SpectroProofer和自动收纸不发生在爱普生Stylus Pro 7700M/7710M的错误。

65 - 冷却风扇锁定检测错误

12 - 纸压板传感器没有检测错误

13 - 异物压纸检测错误

14 - 按纸张原点位置检测失败错误

15 - CR惠普传感器没有检测错误

16 - 纸按系统异常测量值的误差

17 - 卷取系统异常测量值的误差

20 - 斯莱克传感器没有检测错误

01 - 未安装机制 - (摩传感器是OFF

MAINTENANCE REQ - 0002 - The CR scan pass counter has come near the specified life.


MAINTENANCE REQ - 0008 - The RTC backup battery becomes exhausted


MAINTENANCE REQ - 0010 - Communication with the AID Board is not established.


MAINTENANCE REQ - 0040 - The pump counter has come near the specified life.


MAINTENANCE REQ - 0080 - The date has not been set


MAINTENANCE REQ - 0800 - Cartridge waste ink pad near end of life


MAINTENANCE REQ - 1000 *1 - Ink Selector near end of life


MAINTENANCE REQ - 4000 - It detects twice in a row that all the nozzles are clogging. copyright dayinnet

MAINTENANCE REQ - 0088 - The RTC backup battery becomes exhausted and the date has not been set.


Service Request Errors


SERVICE REQ - 1101 - CR life error


SERVICE REQ - 1125 - CR HP detection error

SERVICE REQ - 1138 - Over current error


SERVICE REQ - 113A - Overload error


SERVICE REQ - 113B - Over speed error


SERVICE REQ - 113C - Reversing error


SERVICE REQ - 113D - Driving time-out error

SERVICE REQ - 113E - Velocity deviation error www.dayinnet。com,商机网

SERVICE REQ - 113F - Lock error 印 刷_打 印 网_维修(dayinnet. com)

SERVICE REQ - 122A - Overload error


SERVICE REQ - 122B - Over speed error


SERVICE REQ - 122C - Reversing error 印.刷.打.印.网_

SERVICE REQ - 122D - Driving time-out error dayinnet.com

SERVICE REQ - 122E - Velocity deviation error


SERVICE REQ - 122F - Lock error


SERVICE REQ - 131B - Head driver (transmission gate) overheat error

SERVICE REQ - 13F0 - ICL operation error 版权是印 刷 打 印 网

SERVICE REQ - 1411 - Select error


SERVICE REQ - 1412 - Pump life error 印 刷 打 印(dayinnet .com)网

SERVICE REQ - 1419 - Pump release error 印 刷 打 印_网_设备

SERVICE REQ - 141A - Overload error


SERVICE REQ - 141B - Over speed error


SERVICE REQ - 141C - Reversing error


SERVICE REQ - 141D - Driving time-out error


SERVICE REQ - 141E - Velocity deviation error


SERVICE REQ - 141F - Lock error

SERVICE REQ - 1427 - CSIC destination setting error

SERVICE REQ - 1428 - Ink holder Board Assy


SERVICE REQ - 1430 - Holder ink pad error


SERVICE REQ - 1431 - Ink selector life error 这篇文章来自印.刷.打印网_版权所有

SERVICE REQ - 1434 - IC cover unlock error

SERVICE REQ - 1438 - Maintenance tank error 本文来自印刷_打印网

SERVICE REQ - 1439 - Cap error


SERVICE REQ - 143A - Overload error


SERVICE REQ - 143B - Over speed error


SERVICE REQ - 143C - Reversing error


SERVICE REQ - 143D - Driving time-out error 印.刷.打.印,网www.dayinnet,com

SERVICE REQ - 143E - Velocity deviation error


SERVICE REQ - 143F - Lock error 印 刷 打_印 网_技术

SERVICE REQ - 144A - Overload error 印 刷 打_印 网_技术

SERVICE REQ - 144B - Over speed error


SERVICE REQ - 144C - Reversing error 本文来自印刷_打印网

SERVICE REQ - 144D - Driving time-out error

SERVICE REQ - 144E - Velocity deviation error 内容来自dayinnet

SERVICE REQ - 144F - Lock error


SERVICE REQ - 1489 - Wiper error


SERVICE REQ - 148A - Overload error


SERVICE REQ - 148B - Over speed error 印刷打印 网

SERVICE REQ - 148C - Reversing error


SERVICE REQ - 148D - Driving time-out error 印刷打印 网

SERVICE REQ - 148E - Velocity deviation error

SERVICE REQ - 148F - Lock error


SERVICE REQ - 1494 - Ink selector error


SERVICE REQ - 1496 - Ink selector sensor error detection

SERVICE REQ - 1497 - Switching time-out error


SERVICE REQ - 149D - Driving time-out error


SERVICE REQ - 1501 - Release motor phase detection error

SERVICE REQ - 150C - PG phase detection error 本文来自印刷_打印网

SERVICE REQ - 151A - Overload error


SERVICE REQ - 151B - Over speed error

SERVICE REQ - 151C - Reversing error


SERVICE REQ - 151D - Driving time-out error www.dayinnet。com,商机网

SERVICE REQ - 151E - Velocity deviation error


SERVICE REQ - 151F - Lock error 本文来自www.dayinnet.com

SERVICE REQ - 152A - Overload error


SERVICE REQ - 152B - Over speed error

SERVICE REQ - 152C - Reversing error


SERVICE REQ - 152D - Driving time-out error 印 刷_打 印 网

SERVICE REQ - 152E - Velocity deviation error

SERVICE REQ - 152F - Lock error


SERVICE REQ - 1530 - Driven roller HP detection error

SERVICE REQ - 1536 - Pressurizing reset error


SERVICE REQ - 1537 - Pressurizing error


SERVICE REQ - 153A - Overload error 本文来自www.dayinnet.com

SERVICE REQ - 153B - Over speed error


SERVICE REQ - 153C - Reversing error 印刷打印 网

SERVICE REQ - 153D - Driving time-out error


SERVICE REQ - 153E - Velocity deviation error

SERVICE REQ - 153F - Lock error


SERVICE REQ - 1540 - Cutter HP detection error


SERVICE REQ - 1541 - Cutter return error


SERVICE REQ - 1549 - Motor disconnection error 印 刷 打 印(dayinnet .com)网

SERVICE REQ - 154A - Overload error 印刷 打印网_印刷资讯

SERVICE REQ - 154B - Over speed error


SERVICE REQ - 154C - Reversing error 本文来自印刷_打印网

SERVICE REQ - 154D - Driving time-out error


SERVICE REQ - 154E - Velocity deviation error www,dayinnet。com,打印网

SERVICE REQ - 154F - Lock error 印 刷_打 印 网_维修(dayinnet. com)

SERVICE REQ - 1551 - Paper thickness determining error 本文来自印刷打印 网

SERVICE REQ - 1561 - Paper thickness at power-on error 版权是印 刷 打 印 网

SERVICE REQ - 1800 - AID voltage error


SERVICE REQ - 1A23 - Incorrect RTC data error www.dayinnet。com,商机网

SERVICE REQ - 1A26 - RTC Access T/O error 版权是印 刷 打 印 网

SERVICE REQ - 1A37 - Thermistor error


SERVICE REQ - 1A38 - Transistor environmental temperature error

SERVICE REQ - 1A39 - Head error


SERVICE REQ - 1A40 - IC22 error


SERVICE REQ - 1A41 - Head rank ID input error


SERVICE REQ - 1A50 - I2C communication error (Between elements on ASIC and MAIN)


SERVICE REQ - 1A51 - I2C communication error (Between elements on SUB and MAIN) 印刷 打印网_印刷资讯

SERVICE REQ - 1A52 I- 2C communication error (Between elements on SUB-B and MAIN)


SERVICE REQ - 1A53 - I2C communication error (Between elements on SUB-C and MAIN)

SERVICE REQ - 2000 - NVRAM error

SERVICE REQ - 2002 - SDRAM error

SERVICE REQ - 2003 - FLASH BOOT SUM CHECK error

SERVICE REQ - 200A - F/W load error 本文来自印刷_打印网

SERVICE REQ - 200D - System interrupt watchdog time-out error


SERVICE REQ - 200E - Unknown NMI 印 刷 打_印 网_技术

SERVICE REQ - 2010 - UART communication error


SERVICE REQ - 3000 - AC shut-off 印.刷.打.印,网www.dayinnet,com

SERVICE REQ - D131 - AID error


SERVICE REQ - Fxxx - CPU-related error 内容来自dayinnet

SERVICE REQ - Dxxx - Debug error


  印 刷 打_印 网_技术

Spectroproofer and Auto Take-Up Error Codes 本文来自印刷打印 网



NOTE: SpectroProofer-related errors do not occur on Epson Stylus Pro 7700/7710/7700M/7710M/9700/9710 because it does not support the SpectroProofer.

Auto Take-up Reel-related errors do not occur on Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/WT7900/WT7910//7890/7908 because it does not support the Auto Take-up Reel.
Errors related to the SpectroProofer and Auto Take-up Reel do not occur on Epson Stylus Pro 7700M/7710M.



D3 - Driving auto take-up system
D6 - Driving paper pressing system
65 - Cooling Fan lock detection error
12 - Paper Pressing Plate Sensor no detection error 本文来自dayinnet.com
13 - Foreign material detection error in paper pressing

14 - Paper pressing origin position detection failure error 这篇文章来自印刷打印_网_版权所有
15 - CR HP Sensor no detection error 印.刷.打.印,网www.dayinnet,com
16 - Paper pressing system abnormal measurement value error
17 - Take-up system abnormal measurement value error 印.刷.打.印,网www.dayinnet,com
20 - Slack Sensor no detection error

01 - Mechanism is not installed -(Mount Sensor is OFF) 印.刷.网_企业商机
30 - Driving time-out error
31 - Overload error
32 - Over speed error

33 - Reversing error

34 - Velocity deviation error
35 - Lock error

40- Driving time-out error

41 - Overload error dayinnet.com
42 - Over speed error
43 - Reversing error

44 - Velocity deviation error

45 - Lock error

20 - Driving time-out error





作者: yj    时间: 2014-9-10 20:30
今天我的机器出现了和泵组件有关的错误代码,关机后再开机还是一样,再关机再开机就没有事了。虽然用的兼容墨水,但也不是经常清洗,估计没有大问题。
作者: chuchuhp    时间: 2014-9-11 13:03

作者: xunpu    时间: 2015-7-25 15:59
问个问题,9908出150C代码是什么意思,怎么解决





欢迎光临 中国喷墨论坛-喷墨技术应用-数码影像-数码印刷-数码印花 (http://new.inknet.cn/bbs/) Powered by Discuz! X3.1